This item number 000 is only available until 2023/01/01.
Please contact us regarding a successor product.
The type 8011 is only available until 2023/01/01.
Inline Paddle Wheel Flow sensor for continuous flow measurement
Type 8011 / Article No. 559922
Product description
The paddle-wheel flow sensor for continuous flow measurement is especially designed foruse in neutral, slightly aggressive, solid freeliquids. The sensor is made up of a fitting (S012) and an electronic module (SE11) connected together with screws. The Bürkert designed fitting system ensures simple installation of the sensor into all pipes from DN06 to DN65. It can also be installed in fluid block systems.The sensor produces a frequency pulse signal, proportional to the flow rate, which can easily be transmitted and processed by a Bürkert remote transmitter/indicator (type 8025/8032). The sensor is available in two versions:- with one pulse output: transistor NPN- with two pulse outputs: transistor NPN andPNP.
- Commodity Codes
- 90261021
- Country
- FR
Technical attributes
Name |
Value |
Unit |
---|---|---|
Type | 8011 | |
Product sub-group | Flow rate | |
Flow rate (volume) | Yes | |
Concentration 1 | No | |
Continuous measurement | Yes | |
Dosing | No | |
Switch | No | |
Construction device | Compact | |
Display | No | |
Protection class measurement device (IP) | IP67 | |
DC voltage min. | 4,5 | V |
DC voltage max. | 24 | V |
Battery voltage | No | |
Precision of volume flow rate in relation to reading | 1 | % |
Temperature environment min | -15 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -15 | °C |
Temperature medium max | 100 | °C |
Nominal pressure (DIN EN 1333) | PN 16 | |
Dynamic viscosity min. | 0 | cP |
Dynamic viscosity max. | 300 | cP |
Min measured value of volume flow rate | 1.357 | |
Max measured value of volume flow rate | 45.239 | |
Measured value unit | l/h | |
Detection of flow direction | No | |
Sensor type | Paddle wheel | |
Paddle wheel type | Magnetic | |
Paddle wheel measuring principle detection | Hall | |
Cable plug in delivery | not included | |
Electrical connection 1 type | Plug - M12 | |
Electrical connection 1 quantity | 1 | PCE |
Electrical connection 1 number of contacts | 5 | PCE |
Electrical connection 1 gender | male | |
Electrical connection 1 material category | Plastics | |
Electrical connection 1 material | PA (Polyamide) | |
Electrical connection seal 1 material | EPDM (ethylene propylene diene rubber) | |
Output 1 digital type | Transistor | |
Output 1 digital version NC | No | |
Output 1 digital version NO | No | |
Output 1 digital transistor connection NPN | Yes | |
Output 1 digital transistor connection PNP | No | |
Digital output 1 transistor contactless | 0,02 | A |
Electronics body material category | Plastics | |
Electronics body material | PPS (Polyphenylene sulphide) | |
Seal housing/cover material | EPDM (Ethylene-propylene-diene rubber) | |
Screws material | Stainless steel | |
Parametrisation local | No | |
Parametrisation separate | No | |
Parametrisation fixed | Yes | |
Diameter measuring tube (DN) | 40 | mm |
Fluidic port connection number | 2 | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 1 1/2 | |
Port connection 2 type | Inner thread | |
Port connection 2 thread type | G | |
Port connection 2 thread marking | 1 1/2 | |
Port connection material category | Light metals | |
Port connection material | Brass | |
Measuring pipe material | Brass | |
Armature material | PVDF (Polyvinylidene fluoride) | |
Medium-contacting parts seal material | FKM (Fluor rubber) | |
Paddle wheel material | PVDF (Polyvinylidene fluoride) | |
Paddle wheel axle material | Ceramic | |
Bearing material category | Technical ceramics | |
Bearing material | Ceramic | |
Installation length | 129 | mm |
Weight | 1,746 | kg |