Insertion adaptor/fitting for ELEMENT analytical measurement devices
Type S022 / Article No. 560673
Product description
The adaptor/fitting or measuring chamber is used to connect the compact analytical ELEMENT measuring device into piping systems or vessels. Different versions of adaptors/fittings are available: Adaptors: • PVC-U adaptor to stick into equal or reduced standard metric or ASTM T-fitting • PP adaptor to weld into equal d32 standard metric T-fitting • Stainless steel adaptor for welding • PVC threaded adaptor to screw on vessel or pipe • PVC, PP, stainless steel adaptor for conversion of S020 Bürkert fitting into S022 fitting. Fittings in PVC: • Metric or ASTM T-fitting - True union connection -Solvent end connection • Saddle.
- Commodity Codes
- 90269000
- Country
- FR
Technical attributes
Name |
Value |
Unit |
---|---|---|
Type | S022 | |
Product sub-group | Fitting | |
Temperature medium min | 5 | °C |
Temperature medium max | 80 | °C |
Nominal pressure (DIN EN 1333) | PN 10 | |
Sensor type | for analytical sensor | |
Fitting electronic interface | Insertion 1 1/2 (inch) | |
Min measured value of volume flow rate | 963 | |
Max measured value of volume flow rate | 32.110 | |
Measured value unit | l/h | |
Diameter measuring tube (DN) | 32 | mm |
Fluidic port connection number | 2 | |
Port connection 1 type | Bonded sleeve | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 2 | |
Port connection 1 size DN | DN 25 | |
Port connection 1 DN inch | 1,25 | Inch2 |
Port connection 1 inner diameter (mm) | 31 | mm |
Port connection 1 outer diameter (mm) | 41 | mm |
Port connection 1 adhesive bonding | DIN 8063 | |
Port connection material category | Plastics | |
Port connection material | PVC (Polyvinyl chloride) | |
Measuring pipe material | PVC (Polyvinyl chloride) | |
Armature material | PVC (Polyvinyl chloride) | |
Medium-contacting parts seal material | FKM (Fluor rubber) | |
Installation length | 160 | mm |
Weight | 0,64 | kg |